Shower Upgrade 101 - Best Practices For New Unit Installation

Additional Information



Are you currently trying to locate insight around How to Install a One-Piece Shower Unit?


How to Install a One-Piece Shower Unit
A successful shower installation needs mindful planning as well as a great deal of work. Most of the times, you will need to do 3 types of tasks: mounting walls, setting up the plumbing, and also finishing walls.

Prep work


Firstly, you must choose the kind of shower that you desire to install. It is very important to identify whether the chosen shower is capable of dealing with specific systems and also can manage a safe level of water with the boiler. A lot of shower devices nowadays are made to be flexible to different water pressures (such as kept warm water and also cold mains).
It is likewise crucial to think about the water stress and the planning of the piping as well as drain for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower unit can be linked to the bath tap according to your need, and also the water temperature level can be adjusted via the faucets. Push-on mixers are cheap and also exceptionally easy to set up. Nonetheless, although the tube connection is easy, it is quickly displaced. In addition, it is inconvenient to adjust the temperature.

  • Bath/Shower Mixer: The pipe and also spray of this sort of shower are combined with a bath mixer tap, and also the temperature level can be adjusted through the bath taps. It is an extremely affordable alternative and also no extra plumbing is involved. However, the bath/shower mixers likewise struggle with troublesome temperature level control alternatives.

  • Guidebook Mixer: The tube and spray of a hands-on mixer shower system are a part of the wall unit and the cold and hot water products are linked to a single valve The temperature and also stress of the water are managed via either one or a selection of handles (in extra pricey showers). Although temperature level control is a lot easier in hands-on mixer kinds, they are a lot more pricey than the formerly pointed out mixers. They likewise call for extra plumbing of hot and cold supply of water pipes.

  • Thermostatic Mixer: The hose pipe and spray of this shower type are a part of the wall surface device and also the hot and cold water supplies are attached to a single valve below as well. It is complete with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be also warm. Among the most significant benefits of a thermostatic mixer shower type includes hassle-free temperature level control. However, it is one of the most costly of the different mixer alternatives.

  • Power Shower: A power shower is a single unit consisting of an effective electric pump that is capable of changing both the water pressure and also temperature. This type of shower can be fitted if there is water system from a cold water cistern and also a hot water cyndrical tube. A power shower makes the modification of both pressure as well as temperature simple. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is provided by a combination central heating boiler under mains stress.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply and also it heats the water electrically. It is important to keep in mind that for this shower type to be installed, the keys pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The system allows the temperature level and stress to be changed via a handle. Models with temperature level stabilisers are better as they continue to be unaffected by various other taps elsewhere being used within the house. A major drawback of electrical showers is that the control knob just allows for the choice of high temperatures at much less pressure, or reduced temperatures at a better stress. This is troublesome in the winter season when the spray is usually weak and the keys water is chillier. However, this trouble is tackled in some versions which are offered with a winter/summer setting.


  • Technique


    Depending on the type of shower you desire to set up, the shower head must either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check shutoff.
    Prior to beginning, it is advisable to note the positions of the shower head as well as control, and also to plan the pipe-work entailed. Additionally, the drain system to remove the drainage will require to be intended. Both placements of the cable television path and also the shower switch will additionally need to be thought about if an immediate or electrical shower unit is being installed.
    Utilize the guideline overview given with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is important to cut off the water system. In order to secure the pipelines, they should be provided a water resistant covering and likewise fitted with separating shutoffs. The pipelines can then be buried into the wall surface and also smudged over to neaten the overall look.
    Fit the base tray, shower head, as well as fittings.
    Attach the primary shower control to the pipelines that will certainly be providing the water (This might call for a female screw thread adapter).
    Reconnect the supply of water as well as examination the pipelines for any kind of leakages, as some may require tightening up.
    If you are mounting an electric shower, bear in mind to turn off the electricity supply before making any electrical connections. When these connections have been made (there should be guidance within the instruction manual), the power supply can be switched back on.

    Adjusting Water Pressure to Suit Your Shower


    The cold water reservoir can be lifted to a greater height (sometimes as little as 150mm (6inches)) by fitting a strong wooden support beneath it - possibly composed of struts and blockboards. If you pick this alternative, the major and also circulation pipelines will certainly likewise have to be raised to meet the new height of the storage tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it should be connected into the power supply in order to run.

    Piping and also Drain


    It is best to utilize 15mm size supply pipelines, and also make the go to the shower as short and straight as possible so regarding keep optimal pressure and reduce warmth loss. Furthermore, by minimising the use of elbows for pipeline edges, you can decrease the resistance in the flow of the water. You can attain this by bending the pipes rather.

    A Lot Of Typical Blunders


  • Breaching or disregarding local code restrictions.

  • Making use of pipes that are too tiny.

  • Connecting copper to galvanized without using a brass or dielectric suitable in between the two.

  • Not using tape or pipeline compound at threaded joints.

  • Uneven your components when installing them.

  • Not mounting an air space filling for components.

  • Reducing supply stub outs also brief to install the shutoff valves onto after the ended up wall is in area.

  • Not correctly aligning tubes into installations or stop shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing goes to an angle will create a leak.).

  • When transforming the water back on in your home, constantly run the outside pipe shutoff or flush your commodes to bleed dust and air from the lines. This debris can create issues in your sink taps and various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Direct-to-Stud Shower Enclosure

    I'm very inquisitive about How to Install a Freestand and I hope you enjoyed our post. Sharing is good. Helping others is fun. Bless you for your time. Come back soon.




    Make An Appointment


    Leave a Reply

    Your email address will not be published. Required fields are marked *